Tag Archives: mould removal

Renovating a Ceramic Shower Cubicle in South Yorkshire

Posted on by

We were contacted by a family from Hillsborough, which is a suburb of Sheffield, who had seen some of the work we do renovating shower cubicles on the internet and wanted to know if I would do the same for their shower.

Ceramic Shower Tile and Grout Before Revamp Sheffield Ceramic Shower Tile and Grout Before Revamp Sheffield

One of the biggest problems affecting bathrooms is mould which thrives in a warm damp environment, the best way to prevent it is to extract the moisture created when having a shower with adequate ventilation. Other steps you can take to reduce mould include always leaving the door open after a shower to improve cross ventilation and rinsing the shower down with cold water afterwards. Tile Doctor also have a product called Aqua-Pro that you can spray on your tiles after use.

I went over to take a look and could see that the Ceramic tiles were only slightly stained and would no doubt clean-up easily however the grout had gone black in places with mould and orange in others due to the dyes in shampoos and soaps. Ceramic tiles are glazed and so usually very easy to keep clean however grout and silicone is more vulnerable and if you now cleaned on a regular basis mould can get a grip and it can prove very stubborn to remove.

Ceramic Shower Tile and Grout Before Revamp Sheffield

Cleaning Ceramic Bathroom Tile and Grout

The home owners had tried to rectify the problem before by applying more grout and silicone to the affected areas however this hadn’t cured the ventilation issue, so it wasn’t long before the problem resurfaced. I recommended replacing all the badly affected grout and the silicone sealer strip around the base of the shower to give the cubicle a fresh look.

My first task was to see how far we could get by cleaning the tile and grout using Tile Doctor Duo-Clean which is designed for use in bathrooms where it’s effective at cleaning grout and removing mould. It comes in a spray bottle so it’s just a question of spraying it onto the tile, grout and silicone and leaving it for ten minutes before scrubbing it in with a stiff brush or scouring pad. The soil was then rinsed off the tile and grout and the shower left to dry off for a while, so we could see which areas were so badly stained would need re-grouting.

The next step was to carefully remove the old silicone sealant from around the edges of the shower cubicle using a sharp knife, then using a combination of power tools and blades we removed the grout in the affected areas and put in new white grout to match the exiting.

While the grout was drying, the shower tray was cleaned up and new silicone sealant has added around the base of the shower cubicle using a premium mould resistant silicone that should be more resistant to staining.

Ceramic Shower Tile and Grout After Revamp Sheffield

The combination of cleaning and grout replacement worked a treat and the shower looks like a brand-new installation. This doesn’t resolve the ventilation issue, so I left the customer with a bottle of Tile Doctor Aqua-Pro with instructions to spray the tiles down regularly in order to keep it looking fresh and clean.

Ceramic Shower Tile and Grout After Revamp Sheffield Ceramic Shower Tile and Grout After Revamp Sheffield

 

Source: Shower Tile Cleaning and Sealing Service in South Yorkshire

Renovating a Ceramic Tiled Bathroom in Oxford, Oxfordshire

Posted on by

Our clients contacted us in despair with their bathroom. The request was to renovate their ceramic tiled bathroom at a house in Oxford, a beautiful location, as most will know the city is known worldwide as the home of the University of Oxford, which is in fact the oldest university in the English-speaking world, also known as the “city of dreaming spires”. They had tried many supermarket solutions to clean up the grout and sort out the silicone trim, to no avail. The ceramic tiles were in good condition so the specific focus for the client was on treating the dirty grout and silicone trim around the bath.

Bathroom Before Grout Clean and Silicone Replaced Oxford

The grout has gone black with mould in some places and this is a very common problem in UK bathrooms where it thrives in the warm damp conditions and is usually related to a lack of ventilation. The simple action of leaving a window and door ajar after having a shower helps to cross ventilate and can reduce the problem. Of course, this is not always desirable during cold weather so improved mechanical extraction is always better. Another option is to run the shower cold for a few minutes afterwards, in fact some modern showers have this feature built in for that purpose. I discussed the causes with the client, we agreed a quote and arranged a day to complete the work.

Cleaning and Grouting Ceramic Tiled Bathroom in Oxford

I started by spraying the grout with Tile Doctor Duo-Clean, this is a fast and effective double action grout cleaner and mould remover. It cleans up grout and can remove mould and blackspot from grout and silicone and is suitable for use on plastic and enamel baths and showers. I left this to soak in for about 30 minutes, and then worked in sections spraying more Duo-Clean and scrubbing with a grout brush and rinsing each section with water. After cleaning the whole bathroom, I left it for an hour so that the grout had dried. I could then see if there were any places needing a second clean, in this case there were a few stubborn areas and so the process was repeated. Once I was satisfied I had fully cleaned the grout and tiles I took a break and left the bathroom so that the grout would completely dry out. At this stage the tile and grout were already looking much better.

Resealing Ceramic Tiled Bathroom in Oxford

After lunch I carefully removed all the silicone between the bath, sink and the wall tiles with a sharp knife. This is a little time consuming, but it is important to remove all of the old sealant in order to achieve the best finish. This was then cleaned up and then fresh mould resistant silicone put back in its place. This ensures everything is water tight

For aftercare we recommend the regular application of Tile Doctor Oxy-Pro, this is a powerful alkaline product especially formulated for cleaning shower Tile and Grout. It’s a highly effective cleaner that removes soap scum, body oil, mildew and algae from areas that have been neglected or subjected to frequent use. This will keep on top of the problem and ensure the bathroom continues to look nice and clean.

Bathroom After Grout Clean and Silicone Replaced Oxford

The client was very happy with the result which was completed in one day. The bathroom was certainly left looking very fresh, clean and much more appealing.

 

Source: Ceramic Tile and Grout Cleaning Service in Oxford, Oxfordshire

Renovating Three Shower Cubicles in Sale, Cheshire

Posted on by

The photographs below are from one of three shower cubicles we were asked to clean and restore at a modernised Victorian property in SALE Cheshire. Ceramic tiles are glazed so very easy to keep clean, grout and silicone however are not and if you let mould build-up untreated it can very difficult to remove.

Mould likes a warm damp environment which can be reduced by improving the ventilation in the shower room, other steps you can take to reduce mould include always leaving the door open after a shower to improve cross ventilation and rinsing the shower down with cold water after a shower. Tile Doctor also have a product called Oxy-Pro that you can spray on your tiles after use.

Shower Cubicle Before Cleaning in Sale Shower Cubicle Before Cleaning in Sale

Sale is a town in Trafford, Greater Manchester but is historically part of Cheshire and dates to before the Middle Ages. A survey commissioned by the Royal Mail in 2017 highlighted Sale as the 4th most desirable town in England to live in and being so close to the city of Manchester makes it a popular choice for commuters.

Cleaning Ceramic Bathroom Tile and Grout

To get the grout clean Tile Doctor Pro-Clean was decanted into a spay bottle diluted with water and the solution was sprayed onto the grout lines. Pro-Clean in a strong and effective grout cleaner and after leaving it in place for about five minutes it was scrubbed in by hand using a stiff brush along the grout lines. I also gave the tile and cubicle glass a clean with Tile Doctor Oxy-Pro which comes in a ready to use spray bottle.

The next step was to carefully remove the old silicone sealant from around the edges of the shower cubicle using a sharp knife, so it could be replaced with new.

At this stage I took a step back to review the results of the cleaning, I wanted the best possible outcome for my customer and if more work was needed to get the shower looking it’s best now was the time. I concluded that the grout was much improved by unfortunately the mould staining was still visible in areas and that the best way to proceed would be to colour the grout.

Colouring Shower Tile Grout

Tile Doctor have a Grout Colourant product that’s available in ten different colours including White which I felt would be the best colour for the cubicle. Other colours include three shades of Grey, two shades of Brown and two shades of Beige as well as Black. The Grout Colourant is painted onto the grout lines using a small brush and I find a toothbrush works well for this purpose. Excess colourant needs to be removed from the tile before it sets, and I often find baby wipes work well for this purpose.

The grout colourant adds an epoxy barrier over the grout that is resistant to staining and much easier to clean than the grout itself. With this in place the grout will stay protected and the cubicle should keep its appearance for some time to come.

While the Grout Colourant was drying I replaced the silicone around the base of the shower cubicle using a premium mould resistant silicone that should be more resistant to staining.

Once the colourant and silicone had dried I gave the cubicle a final inspection and buffed up the ceramic tiles with a six-inch white pad fitted to a handheld buffer. As I mentioned before there were three shower cubicles to complete so as one was drying I was able to move onto another and as a result managed to complete all three in one day.

Shower Cubicle After Cleaning in Sale Shower Cubicle After Cleaning in Sale

 
 
Source: Tile and Grout Cleaning and Renovation Service in Sale, Cheshire

Refreshing Bathroom Tile and Grout in Cheltenham

Posted on by

This Ceramic Tiled bathroom was at a house in the historic town of Cheltenham on the edge of the Cotswolds. As you can see from the photograph below the grout between the Ceramic tiles was very stained and had attracted black mould.

Bathroom Tiles Before Cleaning Cheltenham

Refreshing a Ceramic Tiles Bathroom

To get the tile and grout clean I sprayed on Tile Doctor Mould Away and left it to soak in for ten minutes before giving it a scrub with a stiff brush. The resultant slurry was rinsed off and then the process repeated once more.

The Mould Away made a difference to the tile and grout however the grout was still not 100% white, so I recommended applying a grout colourant which I was confident would have the desired effect.

Grout Colouring

Two coats of white Tile Doctor Grout Colourant were then applied; this product is basically painted on top of the existing grout with any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long lasting barrier protecting the grout and also making it much easier to clean, it looks natural and I think you will agree it has made all the difference in fact the customer commented that it looks like a new bathroom.

Bathroom Tiles Before Cleaning Cheltenham

The job was completed in a day and I think you will agree the whole bath area now looks like a new installation.
 
 
Source: Ceramic Tile and Grout Cleaning and Restoration Service in Gloucestershire

Refreshing the Appearance of a Ceramic Shower Cubicle

Posted on by

Shower cubicles can be the most difficult of tiled features to keep clean. Most are exposed to various acid-based soaps and shampoos on a daily basis, allowing mould and general muck to quickly build up along the grout lines and silicone. This leaves the entire area looking quite unappealing. In some cases, the grout lines become stained beyond a point where they can be restored to their original condition, so property owners will typically request to have the grout cut out and replaced however a faster and cheaper method is to have the grout completely recoloured.

Such was the case with this Ceramic tiled shower cubicle at a house in Wigan. It would take a lot to get the cubicle looking great again, having not been cleaned properly for a long time. The property owner decided to contact me for a professional refresh, including cleaning, new silicone sealer and recolouring of the grout.

Ceramic Shower Cubicle Before Refresh Wigan

Cleaning a Ceramic Tiles Shower Cubicle

I started the refresh by applying Tile Doctor Mould Away spray to the tiles and grout, and leaving it to dwell for an hour. As the name of the product suggests, Mould Away is a fast and effective cleaner for the removal of mould from silicone and grout, making it ideal for use on shower cubicles similar to this one. I then rinsed the entire area down with water before scrubbing the grout lines and tiles with a stiff grout brush to remove any remaining mould and lime scale, leaving them looking a lot cleaner.

Colouring Grout in a Ceramic Tiles Shower Cubicle

The cleaning process made a big improvement however the grout was still too stained so after removing the silicone strip from around the base of the shower I proceeded to recolour with our white Grout Colourant. The colourant is painted onto the grout and any excess is wiped of the tile before it dries which both improves the appearance of the grout and seals it in to protect it from further staining. The last step was to apply fresh white silicone along the base of the shower.

Ceramic Shower Cubicle After Refresh Wigan

The customer was very pleased with the refreshed appearance of their shower and you must admit it looks much more inviting now.
 
 
Source: Ceramic Tile Clearing and Restoration Service in Greater Manchester

Dealing with Mould on Shower Tiles in Lancashire

Posted on by

If you have a tiled shower area in your home, it’s very likely you’ve experienced problems with the grout becoming excessively dirty and ridden with displeasing black spots of mould. The underlying issue is due to inadequate ventilation which can be a real problem in modern insulated houses and occasionally the grout can get so imbued with contamination that the problem needs to be resolved professionally.

Ceramic Bathroom Tile and Grout Cleaned with Mould in Galgate

In the case of this Ceramic tiled shower area, located at a property in Galgate, Lancashire, mould had turned the grout black and had got into the sealant strip around the base. The property owner had tried using the run-of-the-mill cleaning products you can buy in superstores, but they simply couldn’t get the job done. So, she contacted me to see what could be done.

Cleaning Mouldy Ceramic Shower Tiles

At Tile Doctor, we come across the problem of mouldy shower tiles very often. Excess soaps and shampoos – many of which contain chemicals that harmful to the grout – can quickly build-up if not removed, causing mould and soap scum to emerge quickly, and before you know it, you have a problem like this one.

Thankfully, with the right strength product and cleaning methods, mould can be removed quite easily. The cleaning product used here was Tile Doctor Mould Away, which does what it says on the bottle and can quickly remove mould and black spots from grout and silicone. I applied Mould Away to the grout and surrounding Ceramic tiles and left it to dwell for a short period, before starting to clean the affected areas carefully using soft nail brushes and a small amount of water.

Ceramic Bathroom Tile and Grout Cleaned with Mould in Galgate

Sometimes it is necessary to repeat this process several times to achieve the best possible results, but in this case two attempts was all it took to get the grout looking like new once again.

Ceramic Bathroom Tile and Grout Part Cleaned with Mould Away in Galgate

Sealing Grout

Following the cleaning, the area was rinsed thoroughly with water, before bring dried off quickly with a heat gun on a low setting. I then sealed the grout with a single coat of Tile Doctor Wall Grout Sealer, which is a water-based sealer designed to protect against water, oil and acid-based contaminants, and stop them from spoiling the appearance of the grout. It also provides a transparent finish that does not diminish the original colouring of the grout. To add the finishing touches, I polished off the Ceramic tiles as these were already fully glazed and did not require any extra sealer.

Ceramic Bathroom Tile and Grout Cleaned with Mould Away in Galgate

The before and after photos are a testament to how significantly the condition and appearance of the grout was quickly improved and needless to say, the customer was very satisfied with the result.

Ceramic Bathroom Tile and Grout Cleaned After Cleaning Mould Away in Galgate

 
 
Source: Ceramic Tile Cleaning and Maintenance Service in Lancashire

Cleaning Bathroom Tile and Grout

Posted on by

This was a straight forward request to rejuvenate the ceramic tile and grout around the bath at a house in the town Kettering. The glazed ceramic tiles where in good condition but the grout and seal around the bath had become quite grubby and stained with dyes from shampoos, soaps and had gone dark in some areas where mould had started to get a foothold.

Ceramic Bathroom Tiles Before Cleaning Kettering Ceramic Bathroom Tiles Before Cleaning Kettering

Cleaning Ceramic Tile and Grout

We started by spraying the tiles with Tile Doctor Oxy-Pro which is a strong high-alkaline cleaner especially formulated and packaged for cleaning showers. The spray delivery is important as mixing the cleaning product with air makes it lighter and helps it cling to the tile and grout. The Oxy-Pro was left to soak in for around 15 minutes before being scrubbed into the tile and grout using a stiff grout brush. This action cleaned up the grout and tile nicely removing stains from shampoos and soaps etc.

Removing Mould from Grout

The grout was looking much improved but there was however some evidence of mould remaining which needed dealing with. To tackle this we used Tile Doctor Mould Away which is designed to remove mould off Silicone and Grout. It’s very easy to use, you simply spray the Silicone or Grout to be treated with Mould Away then leave to soak in for twenty minutes and then scrub with a brush and rinse with water repeating the process until the mould has disappeared, in extreme cases you can leave it for a few hours but we didn’t need to do that.

Ceramic Bathroom Tiles After Cleaning Kettering Ceramic Bathroom Tiles After Cleaning Kettering

I was unable to use any tools on this job so it took a fair amount of manual effort but the results were well worth it as you can see.

Source: Residential and Commercial Tile and Stone Cleaning in Northamptonshire