Renovating a Ceramic Tiled Shower Cubicle near Bury

Posted on February 2, 2018 by AbzDominise

The photograph below is of a Ceramic Tiled Shower Cubicle at a house in the lovely village of Walshaw which is part of the Metropolitan Borough of Bury, near Tottington and Bury. Most of the grout had darkened and some of the grout had cracked and had fallen out, the silicone seal at the bottom of the shower had gone mouldy in places and would also need replacing.

I find mould is a common problem in bathrooms and more prevalent in smaller bathrooms where the hot air and steam are unable to dissipate as easily creating the ideal environment for mould to grow. The solution is improved ventilation; alternatively you can keep on top of the situation by regular cleaning with Tile Doctor Duo Clean.

Ceramic Tiled Shower Grout Before Restoration Walshaw

Tile and Grout Cleaning

To tackle this installation I started by spraying the Tile and Grout down with Tile Doctor Duo-Clean, let it soak in for about ten minutes and then scrubbed it in by hand with a stiff brush followed by rinsing with water. This made a big improvement however there were still areas where the grout was still showing evidence of staining and would need a grout colourant applied to make it look like new again.

Next step however was to rake out the areas of grout that had crumbled and replace with new. Being a Tile Doctor this is something we are very familiar with and once the grout had dried I was able to move onto colouring.

Normally I would recommend using a Grout Colourant Pre-Treater before colouring however in this case I felt the scrub down I gave the grout with Duo-Clean would prepare the grout sufficiently and further preparation would not be necessary. The colourant is painted on using a small brush over the grout and any excess wiped off the ceramic tiles. The process makes a big difference to the look of a shower and the colourant provides a barrier over the grout making it easier to clean in future.

Last step was to strip out the silicone sealant between the shower wall and tray and replace with a new mould resistant sealant in white.

Ceramic Tiled Shower Grout After Restoration Walshaw

The shower cubicle was transformed and now looks as though it was recently installed.

Source: Shower Tile Cleaning and Renovation Service in Bury

Ceramic Tiled Bathroom Transformation in Cheshire

Posted on June 16, 2017 by AbzDominise

Mere is an affluent part of Cheshire adjacent to the historic Tatton Park estate and famous for the luxury Mere Resort and Spa. Many of the houses in the area have ample gardens that lead down to a lake, after which the village is named (‘Mere’ meaning a lake that is broad in relation to its depth).

I was fortunate to visit this lovely area of Cheshire recently after receiving an enquiry from a home owner who was keen to have own of his bathrooms refurbished. Unfortunately, the ceramic tiles surrounding the bathtub with shower over had gone mouldy over the years, with the grout lines particularly blackened and dirty.

The root cause of mould build-up is generally due to a lack of ventilation and the simple action of leaving a window and door ajar after having a shower helps to cross ventilate and can reduce the problem, of course this is not always desirable during cold weather so improved mechanical extraction is always better.

Bathroom Before Refurbishment Mere Cheshire

Cleaning and Recolouring a Ceramic Tiled Bathroom

Upon my arrival, I soon got to work, starting by giving the cubicle wall a clean with Tile Doctor Duo Clean. This is a new Tile Doctor product which has a fast and effective double-action formula that cleans grout and removes mould. I left the product to dwell for five to ten minutes, before vigorously scrubbing the grout lines to remove the copious amount of mould and black spots.

Following this, I rinsed the entire area down with clean water and left it to dry, before removing all the old silicone, as this was to be replaced. The next step involved drying down the clean grout lines quickly by using my heat gun.

Recolouring Bathroom Grout

Cleaning the tile and grout with Duo Clean prepared the grout lines for recolouring using a Tile Doctor Grout Colourant which is available in a wide range of colours. The product is made from an epoxy resin and is formulated to recolour and rejuvenate existing grout joints, it also has the added benefit of forming a barrier over the grout sealing it and therefore protecting it further.

In this case a White colourant was selected to match in nicely with the rest of the bathroom and it was painted on over the grout using a small brush, any excess is wiped off the tile before it gets chance to dry.

To complete the restoration, I buffed the tiles and installed a fresh silicone sealant around the base.

Bathroom After Refurbishment Mere Cheshire

I’m pleased to say my customer was so happy with the outcome that he asked me to do the other two bathrooms, you can’t get a better testimonial than that.

Source: Ceramic Tile Cleaning and Restoration in the Cheshire

Restoring the Appearance of a Ceramic Tiled Hallway

Posted on March 22, 2017 by AbzDominise

Ceramic tiles are usually glazed and therefore non-porous, so when the floor starts to lose its appearance there’s a good chance the problem relates to the grout. This is because the top layer of the Cementous grout is rough and will attract a build-up of dirt over time.

Once dirt becomes ingrained into any porous surface, tile or grout, it isn’t easily removed using supermarket cleaning products. In fact, many standard cleaning products are acidic which can have a negative impact on many surfaces (always read the label before use).

I mention this as I was contacted about restoring a Ceramic tiled floor at a house in my local area of Gloucester. Interestingly the tiles as well as the grout lines had become badly soiled and discoloured, and the property owner was at a loss at how to get them clean.

Ceramic Tiled and Grout Before Cleaning in Gloucester

Deep Cleaning Ceramic Tile and Grout

The tiles were located in the hallway which is one of the busiest areas of any house and as a result had seen a lot of dirt being trampled in and now required a deep clean.

To get them clean I applied Tile Doctor Pro Clean, which is our reliable high alkaline cleaner. I used a strong dilution and let it soak into the Tile and Grout for a short period before scrubbing it in using a buffing machine fitted with a scrubbing pad. This helped to remove any initial layers of ingrained dirt:

Next, I applied Tile Doctor Remove and Go, which is designed to remove heavy instances of soil as well as old dealers, adhesives, and paint stains, to the grout lines. This was left to soak for 20 minutes and I then scrubbed the grout lines with a stiff grout brush.

When I was satisfied that all of the tiles and grout line was clean, I rinsed the floor with water which was extracted with a wet vacuum and then dried all grout lines with a heat gun.

Sealing a Ceramic Tiled Floor

The customer was concerned that the grout lines would darken again over time due to more ingrained dirt, so I recommended that they were sealed in order to protect them.

So, after checking the grout lines were dry a moisture meter, I sealed the grout lines using Tile Doctor Ultra Sealer applied with a pipette. The pipette ensures the sealer is delivered exactly where its needed. Ultra Seal is a solvent-based impregnating sealer designed to provide maximum protection against ingrained dirt and staining.

I should point out that Ceramic tiles are glazed and therefore won’t take a sealer. I think you will agree the floor look much better after a fresh clean and seal. Certainly, the customer was very happy and the hallway looks like new!