Tiled Bathroom Refresh

This Ceramic tiled bathroom with shower was installed at house Wilmslow and was overdue a refresh. You can see from the photographs below that the bathroom was looking tired and the tile and grout was discoloured with mould and acid build-up from washing products.

Ceramic Bathroom Tiles Wilmslow Before Ceramic Bathroom Tiles Wilmslow Before

Cleaning Ceramic Tile and Grout

The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean which is a strong alkaline Tile and Grout cleaning product. The solution was decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry.

Grout Colouring

The grout looked better but I was unable to shift some of the staining so we decided to apply a white Grout Colourant, it’s a time consuming process but I think you will agree it made a big difference. Additionally the grout colourant product we use also forms a barrier over the surface making the grout much easier to clean going forward.

The last step was to remove the silicone sealant from along the top of bath and replace with new.

Ceramic Bathroom Tiles Wilmslow After Ceramic Bathroom Tiles Wilmslow After

 
 
Source: Bathroom Tile Cleaning North-Cheshire

One thought on “Tiled Bathroom Refresh

Comments are closed.