Renovating a Ceramic Shower Cubicle in South Yorkshire

We were contacted by a family from Hillsborough, which is a suburb of Sheffield, who had seen some of the work we do renovating shower cubicles on the internet and wanted to know if I would do the same for their shower.

Ceramic Shower Tile and Grout Before Revamp Sheffield Ceramic Shower Tile and Grout Before Revamp Sheffield

One of the biggest problems affecting bathrooms is mould which thrives in a warm damp environment, the best way to prevent it is to extract the moisture created when having a shower with adequate ventilation. Other steps you can take to reduce mould include always leaving the door open after a shower to improve cross ventilation and rinsing the shower down with cold water afterwards. Tile Doctor also have a product called Aqua-Pro that you can spray on your tiles after use.

I went over to take a look and could see that the Ceramic tiles were only slightly stained and would no doubt clean-up easily however the grout had gone black in places with mould and orange in others due to the dyes in shampoos and soaps. Ceramic tiles are glazed and so usually very easy to keep clean however grout and silicone is more vulnerable and if you now cleaned on a regular basis mould can get a grip and it can prove very stubborn to remove.

Ceramic Shower Tile and Grout Before Revamp Sheffield

Cleaning Ceramic Bathroom Tile and Grout

The home owners had tried to rectify the problem before by applying more grout and silicone to the affected areas however this hadn’t cured the ventilation issue, so it wasn’t long before the problem resurfaced. I recommended replacing all the badly affected grout and the silicone sealer strip around the base of the shower to give the cubicle a fresh look.

My first task was to see how far we could get by cleaning the tile and grout using Tile Doctor Duo-Clean which is designed for use in bathrooms where it’s effective at cleaning grout and removing mould. It comes in a spray bottle so it’s just a question of spraying it onto the tile, grout and silicone and leaving it for ten minutes before scrubbing it in with a stiff brush or scouring pad. The soil was then rinsed off the tile and grout and the shower left to dry off for a while, so we could see which areas were so badly stained would need re-grouting.

The next step was to carefully remove the old silicone sealant from around the edges of the shower cubicle using a sharp knife, then using a combination of power tools and blades we removed the grout in the affected areas and put in new white grout to match the exiting.

While the grout was drying, the shower tray was cleaned up and new silicone sealant has added around the base of the shower cubicle using a premium mould resistant silicone that should be more resistant to staining.

Ceramic Shower Tile and Grout After Revamp Sheffield

The combination of cleaning and grout replacement worked a treat and the shower looks like a brand-new installation. This doesn’t resolve the ventilation issue, so I left the customer with a bottle of Tile Doctor Aqua-Pro with instructions to spray the tiles down regularly in order to keep it looking fresh and clean.

Ceramic Shower Tile and Grout After Revamp Sheffield Ceramic Shower Tile and Grout After Revamp Sheffield

 

Source: Shower Tile Cleaning and Sealing Service in South Yorkshire

Renovating Three Shower Cubicles in Sale, Cheshire

The photographs below are from one of three shower cubicles we were asked to clean and restore at a modernised Victorian property in SALE Cheshire. Ceramic tiles are glazed so very easy to keep clean, grout and silicone however are not and if you let mould build-up untreated it can very difficult to remove.

Mould likes a warm damp environment which can be reduced by improving the ventilation in the shower room, other steps you can take to reduce mould include always leaving the door open after a shower to improve cross ventilation and rinsing the shower down with cold water after a shower. Tile Doctor also have a product called Oxy-Pro that you can spray on your tiles after use.

Shower Cubicle Before Cleaning in Sale Shower Cubicle Before Cleaning in Sale

Sale is a town in Trafford, Greater Manchester but is historically part of Cheshire and dates to before the Middle Ages. A survey commissioned by the Royal Mail in 2017 highlighted Sale as the 4th most desirable town in England to live in and being so close to the city of Manchester makes it a popular choice for commuters.

Cleaning Ceramic Bathroom Tile and Grout

To get the grout clean Tile Doctor Pro-Clean was decanted into a spay bottle diluted with water and the solution was sprayed onto the grout lines. Pro-Clean in a strong and effective grout cleaner and after leaving it in place for about five minutes it was scrubbed in by hand using a stiff brush along the grout lines. I also gave the tile and cubicle glass a clean with Tile Doctor Oxy-Pro which comes in a ready to use spray bottle.

The next step was to carefully remove the old silicone sealant from around the edges of the shower cubicle using a sharp knife, so it could be replaced with new.

At this stage I took a step back to review the results of the cleaning, I wanted the best possible outcome for my customer and if more work was needed to get the shower looking it’s best now was the time. I concluded that the grout was much improved by unfortunately the mould staining was still visible in areas and that the best way to proceed would be to colour the grout.

Colouring Shower Tile Grout

Tile Doctor have a Grout Colourant product that’s available in ten different colours including White which I felt would be the best colour for the cubicle. Other colours include three shades of Grey, two shades of Brown and two shades of Beige as well as Black. The Grout Colourant is painted onto the grout lines using a small brush and I find a toothbrush works well for this purpose. Excess colourant needs to be removed from the tile before it sets, and I often find baby wipes work well for this purpose.

The grout colourant adds an epoxy barrier over the grout that is resistant to staining and much easier to clean than the grout itself. With this in place the grout will stay protected and the cubicle should keep its appearance for some time to come.

While the Grout Colourant was drying I replaced the silicone around the base of the shower cubicle using a premium mould resistant silicone that should be more resistant to staining.

Once the colourant and silicone had dried I gave the cubicle a final inspection and buffed up the ceramic tiles with a six-inch white pad fitted to a handheld buffer. As I mentioned before there were three shower cubicles to complete so as one was drying I was able to move onto another and as a result managed to complete all three in one day.

Shower Cubicle After Cleaning in Sale Shower Cubicle After Cleaning in Sale

 
 
Source: Tile and Grout Cleaning and Renovation Service in Sale, Cheshire

Renovating Ceramic Tile and Grout in Childs Ercall, Shropshire

Ceramic tiles don’t have the charm of natural stone, but they are very easy to keep clean; grout on the other hand has a porous top layer that can become stained. This was the problem with a customer of mine who lives in the small rural village of Childs Ercall in the North of Shropshire. The customer had moved in about two years ago and they said that they can keep the floor clean and their main problem was the grout.

I went to take a look at the problem and gave the grout in one section a good scrub with Tile Doctor Pro-Clean which is a strong alkaline tile and grout cleaning product. The result was good and although the grout returned to its original colour they wanted it to be changed.

Ceramic Tiled Kitchen Floor Before Grout Cleaning in Childs Ecrall

Cleaning and Preparing the Ceramic Tile and Grout

Before colouring the grout, it made sense to give the Ceramic tile and grout a thorough clean by scrubbing in a weak dilution of Tile Doctor Pro-Clean with a floor buffer fitted with a scrubbing pad running at slow speed. Once done I rinsed the floor with water and extracted the slurry with a wet vacuum.

With any grit and dirt removed from the floor the next step was to prepare the grout for the colourant. Tile Doctor have an acidic pre-treater cleaner for this which cleans and microscopically etches the grout giving the colourant a superior bond with the colourant. The solution is applied to the grout and then scrubbed in with a stiff brush before being rinsed off with water as before.

Applying Grout Colouring

With the tiles clean and the grout prepped I left the floor to dry for an hour before moving onto grout colouring using a colour of their choosing. There are ten colours in the Tile Doctor range and they are easily applied using a small brush wiping off any excess as you go, it was a large area with a lot of grout lines to cover so took the rest of the day to complete

Ceramic Tiled Kitchen Floor After Grout Cleaning in Childs Ecrall

I have to agree with the customer, changing the grout colour was a good move and I think you will agree the floor now looks much improved. The grout colourant has the additional advantage of providing a barrier over the grout which will protect it from further issues and make it as easy to clean as the ceramic tiles.
 
 
Source: Ceramic Tile and Grout Cleaning Service in Childs-Ercall, Shropshire