This Ceramic Tiled Floor was in Penarth near Cardiff, the tile were 150 mm x 150 mm red dust pressed composition, known as versatile as it can be laid on both sides sometimes found around swimming pool areas due to their non-slip raised definition. The floor was looking a bit tired, so the customer asked if they could be revived. I did an inspection of the floor and noticed the grout was loose at the lounge doorway and this had to be re-grouted after my wet vacuum sucked it out part way through the cleaning process.
Cleaning Ceramic Tiles
First of all I tested for moisture which read very low, which was good news as it meant I was not going to have any issues with moisture in the tiles. I then applied masking tape to the skirting and carpet riser at the bottom of the staircase; I always protect these areas as once I removed a little paint on another customers skirting with Tile Doctor Remove and Go and so I deducted £50 .00 off the bill by way of compensation.
I then covered the floor with Tile Doctor Remove and Go let it soak in for half an hour, the floor was then rinsed twice and then to clean the grout I applied with Tile Doctor Pro-Clean which was then scrubbed into the grout joints; it was at this point some lose grout came away. The floor was rinsed twice again and I re-grouted the areas which needed it. The floor was dried with a wet vacuum and then it was left to dry for two days.
Sealing Ceramic Versatile Tiled Floor
On my return I checked the damp levels again before starting to seal the floor with three coats of Tile Doctor Seal and Go which also adds a nice shine to the tile. Caution should be applied to this type of tile as streak marks can be prominent when applying the sealer, in my experience I find as soon as the sealer is applied to the tile with a paint pad a cloth or any other method it marks the tile. It’s possible I’m just a being a perfectionist as the customer was thrilled with the finish.
As well as bathrooms and kitchens we also cover swimming pools which usually have a tiled pool surround and this was certainly the case with the photograph below which was taken at a property near the small market town of Sandy in Bedfordshire where the tile and grout around the pool had discoloured over time.
Cleaning Mosaic Pool Tiles
To clean the tiles we used a strong dilution of Tile Doctor Pro-Clean which left to soak into the tile and grout in sections before being scrubbed in using a stiff brush. You have to be careful with machinery around swimming poos as you don’t want any cleaning products draining into the swimming pool water.
The pro-clean and scrubbing action loosened the dirt and we were then able to use a Rotovac machine to finish the floor off and get the results you see above. The Rotovac which is also known as a Spinner tool is a really useful piece of equipment for a Tile Cleaner as it directs a jet of high pressure hot water onto the tile whilst simultaneously removing the water through a separate suction feature. The tool needs a lot of power so it runs from a high-pressure cleaning and extractor unit fitted into our van which can delivery water pressure between 500 and 3000 PSI. Another feature of the tool is the side skirts around the spinner head which along with the high suction prevent water from being splashed around making it ideal for this job.
These grubby looking Textured Ceramic Tiles were in a bathroom of a house in the old village of Narborough near Leicester. As you can see from the picture below they were overdue for a deep clean and the customer has been struggling to do that. On inspection it was clear that the textured surface which was designed to prevent slipping has become ingrained with dirt making them difficult to clean and therefore lose appearance. This can be a problem with a rough surface and so to prevent dirt building up the surface is sealed, however sealers do wear off after a few years depending on use and I suspect this is what happened here.
Cleaning and Preparing Porcelain Tile and Grout
To remove any remaining sealer from the less worn areas and clean the tile and grout a strong dilution of Tile Doctor Pro-Clean was applied and left to soak in to the surface for around ten minutes before scrubbing it into the tile with a rotary machine fitted with a black scrubbing pad and also a stiff hand brush along the grout lines. The floor was then rinsed down with fresh water which was removed with a wet Vacuum. This stripping and cleaning process was repeated until the tile and the grout was looking new again after which the floor was given a thorough rinse in order to remove any trace of product and then dried as much as possible using the wet vacuum.
Sealing Micro Porous Porcelain
We left the floor to dry and then came back two days later to seal the floor, testing it first with a damp meter to ensure it was dry. The two days was enough time to dry it out so we moved on to seal the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the tile providing strong stain protection as well as lifting the colour.
I think you will agree the floor tile and grout look much cleaner and the new sealer will make it much easier to clean going forward.
This shower cubicle was installed in the main bathroom of a house in Bishopton where the grout had become quite grubby and the Ceramic tiles were looking quite dull. The owner was thinking about re-tiling the bathroom and thought they would give us a call first to see if we could refresh the look without the expense.
Cleaning Ceramic Tile and Grout
We started by spraying the tiles with Tile Doctor Oxy-Pro which is a strong high-alkaline cleaner especially formulated and packaged for cleaning showers. The spray delivery is important as mixing the cleaning product with air makes it lighter and helps it cling to the tile and grout. The Oxy-Pro was left to soak into the tiles for around 15 minutes before being scrubbed into the tile and grout using a stiff grout brush. This action cleaned up the grout and tile nicely removing stains from shampoos and soaps etc.
Removing Mould from Grout
The grout was looking much improved but there was however some evidence of mould remaining which needed dealing with. To tackle this we used Tile Doctor Mould Away which is designed to remove mould off Silicone and Grout. It’s very easy to use, you simply spray the Silicone or Grout to be treated with Mould Away then leave to soak in for five minutes and then scrub with a brush and rinse with water repeating the process until the mould has disappeared.
It took a fair amount of manual effort but the results were well worth it as you can see.
This was a rather unusual request we were asked to look at in the Oxfordshire village of Long Hanborough; they had recently laid a new Tarmac drive and unfortunately it had been walked into the Ceramic tiled kitchen floor leaving a lot of dark staining. After failing to clean the tiles with various supermarket floor cleaners she called in Tile Doctor. Tile Doctor cleaning products are industrial strength so when I arrived I gave her a demonstration on a couple of tiles to show I could clean them and she was amazed at how easy I made it look and booked the work with me.
Removing Tarmac Stains from Ceramic Tiles
To resolve the problem I scrubbed the floor with Tile Doctor Grout Clean Up which is an acid based product designed to remove grout smears and mineral deposits. Ceramic tiles are very durable however being acid based you can’t leave it on the surface too long so the process was to quickly work it into the stain with a stiff bristle brush, rinse with water and then remove using a wet vacuum.
You can see the difference in the final photograph below where the dark staining has disappeared; the difference in tile colour was due to the lighting. The whole job was completed in one day and the customer was relieved that her floor was not ruined and left the comment below on the Tile Doctor feedback system.
He was thorough and excellent. Very grateful. M. Rawlings, Long Hanborough
We were asked to clean these textured ceramic floor tiles in Wendover Bucks which had become heavily soiled and ingrained with dirt leaving the tiles with a black appearance, the grout lines had also become stained and discoloured. Our customer had tried all types of cleaning agents but could never get the desired effect.
Cleaning a Textured Ceramic Tiled Floor
A dilution of Tile Doctor Pro-Clean alkaline tile cleaner was applied throughout the tiled floor and worked in with the aid of a scrubbing pad fitted to a rotary machine, a stiff hand brush was also used along the grout lines and this managed to lift most of the soiling from the floor.
Next step was to use our powerful truck mounted heated turbo system which jet washed the remaining particles out of the crevasses of the stone. This system uses high pressure heated water though a spinner tool, it’s an amazing tool that returns the dirty water directly back to a recovery tank leaving the floor chemical free and neutralised.