Ceramic Tiled Shower Cubicle Renovation in West Surrey

When renting property out a property it makes a lot of sense to give it a quick facelift to ensure it’s more attractive to future tenants, not only will it rent faster but it should also command a better price. Many landlords don’t realise this but giving bathrooms, a facelift is the one thing you can do quite cheaply and quickly that can rapidly improve the appearance and desirability of a house, after all no-one wants to rent a place with grotty tiles!

A returning customer of mine recently contacted me about restoring the condition of a Ceramic tiled shower cubicle in a flat she owned in the Surrey village of Oxshott. She was about to rent the property out to a couple of international students, and so wanted it looking its best in all aspects.

Tiled Shower Before Renovation in Oxshot

You may be wondering why international students would want to live in Oxshott but it’s not too far at all from the University of Surrey. The town of Oxshott is quite large and has a low population density. There are many private roads in the village – and it has been named the “most expensive village in England” and so a very desirable location.

Cleaning a Ceramic Tiled Shower Cubicle

We tend to follow a tried and tested method that we have developed at Tile Doctor for restoring shower cubicles. To begin, I cleaned the grout lines using our acidic cleaning product, Tile Doctor Clean-Up. The product was scrubbed into shower wall tile and grout using a handheld rotary machine fitted with a six-inch black scrubbing pad.

Being a concentrated phosphoric acid cleaner, Grout Clean-Up effectively removes mineral deposits (salts etc) and grout smears from the tile surface to leaving it looking much fresher, it also prepares the grout for a superior bond with the grout colourant that was to be added later.

Following this, I scrubbed the tiles down with Tile Doctor Pro-Clean to provide a general clean and to remove any other muck and dirt. This was followed by a rinse with water to remove any trace of cleaning product from the tile and grout. The next step was to remove all the existing silicone mastic with a sharp knife; the mastic sealant stained with mould and much in need of replacement. Once all the rubbish was swept out, I dried any remaining dampness from the grout and tiles with a heat gun.

Grout Colouring a Ceramic Tiled Shower Cubicle

This left the grout ready to be recoloured. I did this over the course of a few hours, using a White colourant from the Tile Doctor Grout Colourant range. White is just one of ten colours available in the range and was chosen in this case to give the grout a really fresh look and to blend in with the White Ceramic tiles.

The application of Grout Colourant not only colours the grout joints – it also seals and rejuvenates them. It also dries quickly, so I could apply a second coat quite soon after the first, removing any excess as I went.

Once the restoration was finished, I resealed the shower base with fresh silicone mastic again in White to match the tile and grout. As a courtesy, I also cleaned the shower glass too, leaving an excellent result overall – and one very happy customer!

Tiled Shower After Renovation in Oxshot

 
 
Source: Ceramic Tile Cleaning and Renovation Service in Surrey

Maintaining Textured Ceramic Tiles

These grubby looking Textured Ceramic Tiles were in a bathroom of a house in the old village of Narborough near Leicester. As you can see from the picture below they were overdue for a deep clean and the customer has been struggling to do that. On inspection it was clear that the textured surface which was designed to prevent slipping has become ingrained with dirt making them difficult to clean and therefore lose appearance. This can be a problem with a rough surface and so to prevent dirt building up the surface is sealed, however sealers do wear off after a few years depending on use and I suspect this is what happened here.

Narborough Cleaning Textured Ceramic Tiles Before

Cleaning and Preparing Porcelain Tile and Grout

To remove any remaining sealer from the less worn areas and clean the tile and grout a strong dilution of Tile Doctor Pro-Clean was applied and left to soak in to the surface for around ten minutes before scrubbing it into the tile with a rotary machine fitted with a black scrubbing pad and also a stiff hand brush along the grout lines. The floor was then rinsed down with fresh water which was removed with a wet Vacuum. This stripping and cleaning process was repeated until the tile and the grout was looking new again after which the floor was given a thorough rinse in order to remove any trace of product and then dried as much as possible using the wet vacuum.

Sealing Micro Porous Porcelain

We left the floor to dry and then came back two days later to seal the floor, testing it first with a damp meter to ensure it was dry. The two days was enough time to dry it out so we moved on to seal the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the tile providing strong stain protection as well as lifting the colour.

Narborough Cleaning Textured Ceramic Tiles After
I think you will agree the floor tile and grout look much cleaner and the new sealer will make it much easier to clean going forward.

Source: Residential and Commercial Tile, Stone and Grout Cleaning in Leicestershire