Deep Cleaning Bathroom Ceramic Tiles in St Albans

This was a small family bathroom at a house in St Albans with white ceramic glazed tiles and what was once white grout. The grout was now stained and proving difficult to keep clean, additionally the silicone seal between the tile and the bathtub was perishing. The bathroom needed cleaning and restoring to give it a new lease of life as well as making it easier to maintain for the busy family.

Bathroom Tiles Before Cleaning St Albans

Were actually based in St Albans so always a pleasure to pop round and meet fellow residents. The city dates to the Romans when it was known as Verulamium and these days its popular with commuters working in London.

Cleaning a Ceramic Bathroom Tile and Grout

On arrival I inspected the tiles around the bath and could see they were going to be problematic, the silicone sealant was starting to perish, and I was concerned that the bottom row may be not be watertight. I like to do a job right the first time round so I decided the best thing to do would be to remove the row around the bathroom edge, clean them up and refit them with fresh adhesive, grout and reseal with silicone.

With that in mind my first job was to give the ceramic tile and grout a deep clean by spaying on Tile Doctor Aqua-Pro and then scrubbing it in with polypropylene brushes and pads. This product is designed for the regular cleaning of bathroom tiles as is Tile Doctor Duo-Clean which is a stronger product that can tackle mould as well. The tile and grout were then given a high-pressure steam clean using a special machine we usually use on floor tiles and then let to dry off over lunch.

Ensuring a Tight Bath Seal

After lunch the old silicone was stripped off between the bathtub and wall tile and this was followed by the careful removal of the bottom row of ceramic tiles. This is done by removing the grout first with an oscillating hand tool and then carefully prising the tiles off the wall without damaging them.

Bathroom Tiles Replacement St Albans

The old adhesive was then scrapped off the exposed area to prepare the wall for re-tiling and the tiles were re-installed with fresh. Once the adhesive and gone off the tiles were re-grouted and the grout left to dry before applying a fresh silicone sealant between the tile and bathtub. During the various drying phases, the ceramic bathroom tiles were buffed using a soft white buffing pad to give them an as new appearance.

Bathroom Tiles After Cleaning St Albans

The job was completed in one day and the bathroom now looks like it was recently installed.
 
 
Source: Ceramic Tile Cleaning and Renovation Service in St Albans

Ceramic Tiled Bathroom Transformation in Cheshire

Mere is an affluent part of Cheshire adjacent to the historic Tatton Park estate and famous for the luxury Mere Resort and Spa. Many of the houses in the area have ample gardens that lead down to a lake, after which the village is named (‘Mere’ meaning a lake that is broad in relation to its depth).

I was fortunate to visit this lovely area of Cheshire recently after receiving an enquiry from a home owner who was keen to have own of his bathrooms refurbished. Unfortunately, the ceramic tiles surrounding the bathtub with shower over had gone mouldy over the years, with the grout lines particularly blackened and dirty.

The root cause of mould build-up is generally due to a lack of ventilation and the simple action of leaving a window and door ajar after having a shower helps to cross ventilate and can reduce the problem, of course this is not always desirable during cold weather so improved mechanical extraction is always better.

Bathroom Before Refurbishment Mere Cheshire

Cleaning and Recolouring a Ceramic Tiled Bathroom

Upon my arrival, I soon got to work, starting by giving the cubicle wall a clean with Tile Doctor Duo Clean. This is a new Tile Doctor product which has a fast and effective double-action formula that cleans grout and removes mould. I left the product to dwell for five to ten minutes, before vigorously scrubbing the grout lines to remove the copious amount of mould and black spots.

Following this, I rinsed the entire area down with clean water and left it to dry, before removing all the old silicone, as this was to be replaced. The next step involved drying down the clean grout lines quickly by using my heat gun.

Recolouring Bathroom Grout

Cleaning the tile and grout with Duo Clean prepared the grout lines for recolouring using a Tile Doctor Grout Colourant which is available in a wide range of colours. The product is made from an epoxy resin and is formulated to recolour and rejuvenate existing grout joints, it also has the added benefit of forming a barrier over the grout sealing it and therefore protecting it further.

In this case a White colourant was selected to match in nicely with the rest of the bathroom and it was painted on over the grout using a small brush, any excess is wiped off the tile before it gets chance to dry.

To complete the restoration, I buffed the tiles and installed a fresh silicone sealant around the base.

Bathroom After Refurbishment Mere Cheshire

I’m pleased to say my customer was so happy with the outcome that he asked me to do the other two bathrooms, you can’t get a better testimonial than that.

Bathroom After Refurbishment Mere Cheshire

 
 
Source: Ceramic Tile Cleaning and Restoration in the Cheshire

Refreshing Ceramic Bathroom Tiles

This bathtub with shower over was at a house in the village of Kilmacolm near Greenock. As you can see from the photograph below the grout was stained in places and a tile had become loose behind the taps due to a previous leak causing it to fall out.

Bathroom Refresh Before Kilmacolm

Refreshing a Ceramic Tiles Bathroom

The first job was to put the loose ceramic tile back on the wall, a process involving the scraping off the adhesive and grout from the wall and tile before re-fixing with fresh tile adhesive and the grouting. We placed a blanket in the bathtub during the work to protect it.

Next the tiles were given a wash down Tile Doctor Pro-Clean with particular attention paid to the grout by scrubbing it with a stiff brush. It was our intention to use a grout colourant on the grout and I wanted to ensure we had a good bond.

Whilst the tiles were drying I set about stripping off the old silicone sealant between the bath and the ceramic tiles wall, debris cleared and any remaining sealant was carefully scraped away and then replaced with new silicone.

Grout Colouring

Last step was to apply two coats of white Tile Doctor Grout Colourant, this product is basically painted on top of the existing grout with any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long lasting barrier protecting the grout and also making it much easier to clean, it looks natural and combined with the new silicone it gave the whole bath surround a real uplift.

Bathroom in Kilmacolm After Refresh

The job was completed in a day and I think you will agree the whole bath area now looks like a new installation.
 
 
Source: Professional Tile, Stone and Grout cleaning services in Glasgow