Refreshing the look of Ceramic Floor Tiles

Moving into a new home is a stressful but rewarding experience. This customer had just recently moved into a property in the neighbouring and historic Flintshire town of Mold, and was keen to make some renovations.

High on the agenda was the restoration of a large number of Ceramic floor tiles spread throughout multiple downstairs rooms. Although undecided as to whether to keep the tiles for the long-term or have them removed, the customer did resolve to have them professionally cleaned, especially since the previous owner had left the grout in a miserable state.

Ceramic Tiled Floor Before Cleaning in Mould

Upon initial inspection I noticed that the previous owner had attempted to put more grout on top of the existing one in some areas, the problem with this being that the two groups were of different colours. This left the grout looking inconsistent and dirtier than it actually was. I mentioned to the customer that I could re-colour the grout for them after cleaning the floor and that it would be the best solution in this situation.

Ceramic Tiled Floor Before Cleaning in Mould

Cleaning and Colouring Ceramic Tiled Floor Grout

As mentioned, the tiles themselves needed a deep clean, and so I set about applying a strong dilution of Tile Doctor Pro Clean liberally over the floor and leaving it to dwell for a short period. This allows the product, a high alkaline cleaner suitable for use on most natural stone floors, to seep into the pores of the stone to lift out and dissolve ingrained dirt and stains. Once I had allowed it to dwell I scrubbed the product into the tiles using a black pad fitted to a rotary machine.

Of course I also paid special attention to the grout lines, carefully cleaning them using more Pro Clean. With some floors I usually give the floor an acid wash at this with Tile Doctor Grout Clean Up to remove grout smears and mineral salt deposits but this was not necessary on this particular occasion.

Ceramic Tiled Floor After Cleaning in Mould

Once I had cleaned the entire floor I gave it a thorough rinse with water which was then extracted using a wet vacuum before leaving the floor to dry for two hours assisted with an air mover to speed up the process. When happy that the tiles were completely dry and ready to be re-coloured I went ahead and carefully applied a new black Grout Colourant that matched very well with the natural colour of the stone, giving the whole floor a smarter appearance.

Ceramic Tiled Floor After Cleaning in Mould

The customer was really pleased with the result and left some nice feedback on the job as a whole:

“Excellent experience all round, from initial consultation through to colour advice and scheduling work. Cannot speak highly enough of Joe, thoroughly professional and an amazing result. Highly recommended.”
 
 
Source: Ceramic Tile and Stone Cleaning and Sealing Service in Shropshire

Cleaning Grout in a Ceramic Tiled Shower Cubicle

To clean grout we normally recommend a good scrub with Tile Doctor Pro-Clean which is an strong alkaline product, in some cases however the staining cannot be removed completely and the only thing your can do with the exception of re-grouting is to re-colour the grout with a Grout Colourant which are available in ten popular colours.

In the case of this bathroom at a house in Paisley near Glasgow both the floor of the bathroom and the shower wall tiles were in need of a refresh and after a review of possible solutions is was agreed the easiest thing to do would be to re-colour the floor grout with a Light Grey colourant and the wall tiles with a White colourant.

Bathroom Floor Paisley Before Grout Colouring Shower Wall Tiles Paisley Before Grout Colouring

Cleaning and Colouring Grout

The first step before grout colouring is to give the grout a good scrub with Tile Doctor Pro-Clean to get it as clean as possible before applying the colourant. The grout was then rinsed and then dried ready for the colourant to be applied. You may be surprised to hear but we often find the biggest cause of staining to grout are the dyes contained in soaps and shampoos.

Once the grout is ready it’s a straightforward process of applying the colourant evenly along with thin coats along the grout line working the brush backwards and forwards whilst minimising the amount that gets on the tile. We were not changing the colour of the grout substantially so one coat of colourant was sufficient for both sets of tile.

With two colours being applied we were careful to ensure different brushes were used for each job to avoid any contamination and once the job was complete a damp pad was used to remove excess product from the tile surface.

Bathroom Floor Paisley After Grout Colouring Shower Wall Tiles Paisley After Grout Colouring

As you can see from the photographs the difference was immediate, the other advantage of the colourant is it forms a barrier over the grout protecting it from staining and making it easier to clean going forward.
 
 
Source: Tile and Grout Maintenance Services in Paisley

Removing Limescale From Ceramic Tiles

The photographs below are taken from a house in the old market town of Basingstoke which is now the largest town in Hampshire. I was asked to address a very severe case of Limescale build-up in a shower cubicle. The wall tiles were Ceramic and a shocking amount of Limescale had deposited itself on them and the shower tray over the years; the owners were going to have to replace everything if Tile Doctor could not come to the rescue!

The photos below really demonstrate the extent of the problem and needless to say the Gauntlet had been laid down and I was ready for a challenge!

Limescale Removal Basingstoke Shower Cubicle Before Limescale Removal Basingstoke Shower Cubicle Before

Cleaning a Ceramic tiled shower cubicle

My first task was to provide the Ceramic tiled walls with an initial clean. I did this by firstly mixing a diluted solution of the high alkaline cleaner known as Tile Doctor Pro Clean and then applying this on the tiles and leaving it to dwell for a while before scrubbing it in by hand in order to remove any surface dirt and scum. This was then washed off and I set my mind to the main task at hand: the Limescale removal.

Removing Limescale from a Ceramic Tiled Shower Cubicle

To remove the Limescale it is necessary to apply an acidic product. However, there is an issue for homeowners that most products readily available on the market come in a liquid form, which of course simply drips down the tile, and therefore does not work to the best of its abilities. Fortunately, Tile Doctor recently launched a new product by the name of Acid Gel. Since it’s in a gel form it stays put on the surface and does not evaporate or dry out too quickly. This allows it time to break down the Limescale and other difficult stains.

Acid Gel was thus applied to the affected areas and left to dwell for a short while. I then scrubbed it deeply into the tile and grout lines, and follow up with an application of steam to tackle the stubborn areas and help the Acid Gel to tackle the Limescale.

Limescale Removal Basingstoke Shower Cubicle After Limescale Removal Basingstoke Shower Cubicle After

The results were absolutely fantastic, and even the shower tray – which was in a very poor state indeed – came up very clean. Needless to say, my client was very pleased that they now do not have to replace the shower!
 
 
Source: Limescale Removal Service in Hampshire

Removing Coatings From Ceramic Tiles

This is a great photograph of a Ceramic tiled kitchen floor in at a house in the village of Blaby, in the centre of Leicestershire, that had at some point in its past had been incorrectly sealed with an acrylic topical floor polish. Ceramic tiles are glazed and don’t need sealing, nor usually will they accept one as the glaze make it difficult for anything for adhere properly and so this treatment should never have been applied. Needless to say it didn’t work out as over time the coating had become worn, damaged and heavily soiled.

Heavily Soiled Ceramic tiled kitchen floor before cleaning Blaby

Cleaning Heavily Soiled Ceramic Kitchen Tiles

Before starting we made sure the floor was clear of any obstructions and we removed the kick boards around the bottom of the kitchen units to ensure they would not get scuffed or damp during the cleaning process.

To get the floor clean again the old polish that was now heavily soiled would have to be removed so a strong dilution of Tile Doctor Remove & Go was applied to the floor and left to soak into the floor in-order for it to get to work breaking down the polish. Remove and Go is a specialist product produced by Tile Doctor that is safe to use on Tile and Stone and pretty much does what it says on the tin for the removal of coatings such as sealers etc.

After leaving the solution to dwell for thirty minutes the Remove and Go was scrubbed into the floor using a black scrubbing pad fitted to low-speed weighted rotary machine. The grout lines were also scrubbed thoroughly by hand using a grout brush. The floor was then rinsed and the resulting slurry and cleaning residues removed using a wet vacuum. The floor was inspected at this point and any stubborn areas were spot treated using the same process.

The floor was now clean again and looking as it should, the only thing left to do was to dry the floor which we did with the aid of a force air drying machine and then refit the kickboards to the kitchen units.

Heavily Soiled Ceramic tiled kitchen floor after cleaning Blaby

 
 
Source: Tile, Stone, Grout Cleaning and Restoration service in Leicestershire

Refreshing Ceramic Bathroom Tiles

This bathtub with shower over was at a house in the village of Kilmacolm near Greenock. As you can see from the photograph below the grout was stained in places and a tile had become loose behind the taps due to a previous leak causing it to fall out.

Bathroom Refresh Before Kilmacolm

Refreshing a Ceramic Tiles Bathroom

The first job was to put the loose ceramic tile back on the wall, a process involving the scraping off the adhesive and grout from the wall and tile before re-fixing with fresh tile adhesive and the grouting. We placed a blanket in the bathtub during the work to protect it.

Next the tiles were given a wash down Tile Doctor Pro-Clean with particular attention paid to the grout by scrubbing it with a stiff brush. It was our intention to use a grout colourant on the grout and I wanted to ensure we had a good bond.

Whilst the tiles were drying I set about stripping off the old silicone sealant between the bath and the ceramic tiles wall, debris cleared and any remaining sealant was carefully scraped away and then replaced with new silicone.

Grout Colouring

Last step was to apply two coats of white Tile Doctor Grout Colourant, this product is basically painted on top of the existing grout with any excess wiped off the adjacent tile before it dries. It’s an epoxy based formula that becomes a long lasting barrier protecting the grout and also making it much easier to clean, it looks natural and combined with the new silicone it gave the whole bath surround a real uplift.

Bathroom in Kilmacolm After Refresh

The job was completed in a day and I think you will agree the whole bath area now looks like a new installation.
 
 
Source: Professional Tile, Stone and Grout cleaning services in Glasgow

Deep Cleaning Supermarket Floor Tile and Grout

Photographs below from a Mini-Market in Lewes where high foot traffic was taking its toll on the Ceramic tiled floor which was now is need a dramatic deep clean.

Before Cleaning Dirty Ceramic Tiles in Lewes Mini Market

Shop Floor Cleaning

As the shop is open from 6am-11pm I had to work through the night. I started by applying a medium dilution of Tile Doctor Pro-Clean to shift the muck, this was left to soak in for a while before being scrubbed into the floor using a buffing machine fitted with a scrubbing pad and stiff brush along the grout lines. The floor was then rinsed with warm water which was then extracted using a wet vacuum. I had to repeat the process in stubborn areas but as you can see from the pictures the result was incredible, just look at the pictures!

Cleaning Dirty Ceramic Tiles in Lewes Mini Market
Ceramic tiles are glazed so do not need sealing and as there is no sealer the floor can now be maintain using a regular floor cleaning product. Hopefully they can keep on top of the cleaning however it is a busy floor with hundreds of people walking on it every day so if they do struggle we are always happy to do a regular maintenance clean for them.

After Cleaning Dirty Ceramic Tiles in Lewes Mini Market

Source: Professional Tile, Stone and Grout cleaning service in East Sussex

Dealing with Slippery Ceramic Tiles

We recently had a request to take a look at the Ceramic floor tiles installed at a fairly new office building in Lancaster. Well over 300 people work at the builder and they all come and go via the entrance hall where ceramic tiles have been installed which when wet were very slippery. To confirm this we conducted a pendulum test which is a specially designed piece of certified equipment that measures the surface co-efficient of friction which basically is a recognised measure of how much traction a surface has. The testing is very detailed and the output is an official report that can be used for insurance purposes; the report came back high risk which was expected so no surprise there, the next step was to see how this could be improved.

Applying Anti-Slip Treatment to Ceramic tiles in Lancaster Before

Cleaning Porcelain Tiles ready for Anti-Slip treatment

As well as maintaining Tile and Stone Tile Doctor are also trained in the application of Anti-Slip treatments so we were asked to apply Anti-Slip to the 36m2 of Ceramic tiles in the entrance and rectify the problem. We do this by first getting the floor as clean as possible for which we use a dilution of Tile Doctor Pro-Clean worked into the floor with a rotary machine fitted with a scrubbing pad. The dirty cleaning solution is removed using a wet vacuum and the floor rinsed with clean water.

Applying Anti-Slip treatment to Porcelain tiles

The second step is to apply a Priming and Locking solution which is part of the treatment diluted one part solution to four parts water. This is then left to dry and once dry is followed by the application of the Anti-Slip treatment itself.

The third step in the treatment is to re-apply the diluted Priming and Locking solution before the floor fully dries out and it’s this last step that activates the treatment and locks it in place. There’s no need to wait for the floor to dry at this point it can be used immediately after the last step has been applied.

Applying Anti-Slip Treatment to Ceramic tiles in Lancaster During

Once completed we conducted another Pendulum test so this could be compare to the original test to see if there had been any improvement. I’m glad to report the treatment worked as expected and the latest report came back as low risk. The customer keeps this to prove to any potential insurance claimant that steps had been taken to make the floor as safe as possible. You might notice that floor looks much better as well.

Applying Anti-Slip Treatment to Ceramic tiles in Lancaster After

I should mention that the work was carried out outside of working hours so no disruption was made to the normal operation of the building.
 
 
Source: Commercial Tile, Stone and Grout Maintenance

Cleaning Bathroom Tile and Grout

This was a straight forward request to rejuvenate the ceramic tile and grout around the bath at a house in the town Kettering. The glazed ceramic tiles where in good condition but the grout and seal around the bath had become quite grubby and stained with dyes from shampoos, soaps and had gone dark in some areas where mould had started to get a foothold.

Ceramic Bathroom Tiles Before Cleaning Kettering Ceramic Bathroom Tiles Before Cleaning Kettering

Cleaning Ceramic Tile and Grout

We started by spraying the tiles with Tile Doctor Oxy-Pro which is a strong high-alkaline cleaner especially formulated and packaged for cleaning showers. The spray delivery is important as mixing the cleaning product with air makes it lighter and helps it cling to the tile and grout. The Oxy-Pro was left to soak in for around 15 minutes before being scrubbed into the tile and grout using a stiff grout brush. This action cleaned up the grout and tile nicely removing stains from shampoos and soaps etc.

Removing Mould from Grout

The grout was looking much improved but there was however some evidence of mould remaining which needed dealing with. To tackle this we used Tile Doctor Mould Away which is designed to remove mould off Silicone and Grout. It’s very easy to use, you simply spray the Silicone or Grout to be treated with Mould Away then leave to soak in for twenty minutes and then scrub with a brush and rinse with water repeating the process until the mould has disappeared, in extreme cases you can leave it for a few hours but we didn’t need to do that.

Ceramic Bathroom Tiles After Cleaning Kettering Ceramic Bathroom Tiles After Cleaning Kettering

I was unable to use any tools on this job so it took a fair amount of manual effort but the results were well worth it as you can see.

Source: Residential and Commercial Tile and Stone Cleaning in Northamptonshire

Maintaing Versatile Ceramic Tiles

This Ceramic Tiled Floor was in Penarth near Cardiff, the tile were 150 mm x 150 mm red dust pressed composition, known as versatile as it can be laid on both sides sometimes found around swimming pool areas due to their non-slip raised definition. The floor was looking a bit tired, so the customer asked if they could be revived. I did an inspection of the floor and noticed the grout was loose at the lounge doorway and this had to be re-grouted after my wet vacuum sucked it out part way through the cleaning process.

Versatile Tile Cleaning Penarth Before Cleaning

Cleaning Ceramic Tiles

First of all I tested for moisture which read very low, which was good news as it meant I was not going to have any issues with moisture in the tiles. I then applied masking tape to the skirting and carpet riser at the bottom of the staircase; I always protect these areas as once I removed a little paint on another customers skirting with Tile Doctor Remove and Go and so I deducted £50 .00 off the bill by way of compensation.

Versatile Tile Cleaning Penarth Masking
I then covered the floor with Tile Doctor Remove and Go let it soak in for half an hour, the floor was then rinsed twice and then to clean the grout I applied with Tile Doctor Pro-Clean which was then scrubbed into the grout joints; it was at this point some lose grout came away. The floor was rinsed twice again and I re-grouted the areas which needed it. The floor was dried with a wet vacuum and then it was left to dry for two days.

Versatile Tile Cleaning Penarth Grouting Versatile Tile Cleaning Penarth During Cleaning

Sealing Ceramic Versatile Tiled Floor

On my return I checked the damp levels again before starting to seal the floor with three coats of Tile Doctor Seal and Go which also adds a nice shine to the tile. Caution should be applied to this type of tile as streak marks can be prominent when applying the sealer, in my experience I find as soon as the sealer is applied to the tile with a paint pad a cloth or any other method it marks the tile. It’s possible I’m just a being a perfectionist as the customer was thrilled with the finish.

Versatile Tile Cleaning Penarth After Cleaning

Source: Residential and Commercial Tile and Stone Maintenance in South Wales

Cleaning Ceramic Pool Surround Mosaics

As well as bathrooms and kitchens we also cover swimming pools which usually have a tiled pool surround and this was certainly the case with the photograph below which was taken at a property near the small market town of Sandy in Bedfordshire where the tile and grout around the pool had discoloured over time.

Cleaning Mosaic Pool Tiles

To clean the tiles we used a strong dilution of Tile Doctor Pro-Clean which left to soak into the tile and grout in sections before being scrubbed in using a stiff brush. You have to be careful with machinery around swimming poos as you don’t want any cleaning products draining into the swimming pool water.

Mosaic Pool Tiles Cleaned near Sandy Bedford
The pro-clean and scrubbing action loosened the dirt and we were then able to use a Rotovac machine to finish the floor off and get the results you see above. The Rotovac which is also known as a Spinner tool is a really useful piece of equipment for a Tile Cleaner as it directs a jet of high pressure hot water onto the tile whilst simultaneously removing the water through a separate suction feature. The tool needs a lot of power so it runs from a high-pressure cleaning and extractor unit fitted into our van which can delivery water pressure between 500 and 3000 PSI. Another feature of the tool is the side skirts around the spinner head which along with the high suction prevent water from being splashed around making it ideal for this job.

Source: Residential and Commercial Tile, Stone and Grout Cleaning in Bedfordshire

Maintaining Textured Ceramic Tiles

These grubby looking Textured Ceramic Tiles were in a bathroom of a house in the old village of Narborough near Leicester. As you can see from the picture below they were overdue for a deep clean and the customer has been struggling to do that. On inspection it was clear that the textured surface which was designed to prevent slipping has become ingrained with dirt making them difficult to clean and therefore lose appearance. This can be a problem with a rough surface and so to prevent dirt building up the surface is sealed, however sealers do wear off after a few years depending on use and I suspect this is what happened here.

Narborough Cleaning Textured Ceramic Tiles Before

Cleaning and Preparing Porcelain Tile and Grout

To remove any remaining sealer from the less worn areas and clean the tile and grout a strong dilution of Tile Doctor Pro-Clean was applied and left to soak in to the surface for around ten minutes before scrubbing it into the tile with a rotary machine fitted with a black scrubbing pad and also a stiff hand brush along the grout lines. The floor was then rinsed down with fresh water which was removed with a wet Vacuum. This stripping and cleaning process was repeated until the tile and the grout was looking new again after which the floor was given a thorough rinse in order to remove any trace of product and then dried as much as possible using the wet vacuum.

Sealing Micro Porous Porcelain

We left the floor to dry and then came back two days later to seal the floor, testing it first with a damp meter to ensure it was dry. The two days was enough time to dry it out so we moved on to seal the floor using two coats of Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the tile providing strong stain protection as well as lifting the colour.

Narborough Cleaning Textured Ceramic Tiles After
I think you will agree the floor tile and grout look much cleaner and the new sealer will make it much easier to clean going forward.

Source: Residential and Commercial Tile, Stone and Grout Cleaning in Leicestershire

Cleaning Ceramic Shower Tiles

This shower cubicle was installed in the main bathroom of a house in Bishopton where the grout had become quite grubby and the Ceramic tiles were looking quite dull. The owner was thinking about re-tiling the bathroom and thought they would give us a call first to see if we could refresh the look without the expense.

Gruby Ceramic Tiled Shower in Bishopton Before Gruby Ceramic Tiled Shower in Bishopton Before

Cleaning Ceramic Tile and Grout

We started by spraying the tiles with Tile Doctor Oxy-Pro which is a strong high-alkaline cleaner especially formulated and packaged for cleaning showers. The spray delivery is important as mixing the cleaning product with air makes it lighter and helps it cling to the tile and grout. The Oxy-Pro was left to soak into the tiles for around 15 minutes before being scrubbed into the tile and grout using a stiff grout brush. This action cleaned up the grout and tile nicely removing stains from shampoos and soaps etc.

Removing Mould from Grout

The grout was looking much improved but there was however some evidence of mould remaining which needed dealing with. To tackle this we used Tile Doctor Mould Away which is designed to remove mould off Silicone and Grout. It’s very easy to use, you simply spray the Silicone or Grout to be treated with Mould Away then leave to soak in for five minutes and then scrub with a brush and rinse with water repeating the process until the mould has disappeared.

Gruby Ceramic Tiled Shower in Bishopton After Gruby Ceramic Tiled Shower in Bishopton After

It took a fair amount of manual effort but the results were well worth it as you can see.

Source: Residential and Commercial Tile Cleaning in Renfrewshire

Cleaning a Mouldy Shower Cubicle

A customer contacted us regarding a Ceramic Tiled Shower Cubicle problem they had with their house in Glasgow. The grout and mastic sealant had started to discolour and there was staining on both from mould which is quite a common problem in modern houses and our busy lifestyles and insulated homes with insufficient ventilation.

Cleaning Ceramic Tile and Grout

We started by giving the tiles a good scrub with Tile Doctor Pro-Clean then focusing on the grout we thoroughly scrubbed it with more Pro-Clean and a stiff grout brush, this process did well to clean up the tile and grout but unfortunately the grout had become too badly stained to be satisfactory. It’s a fact that the top layer of grout is actually porous and this is where the staining from the dyes in shampoos etc. will occur. The next step was to cut out all the old and mouldy mastic and seal around the shower using a sharp knife taking care not to scratch the shower tray.

Glasgow Ceramic Shower Refresh Before Cleaning Glasgow Ceramic Shower Refresh After Cleaning

Recolouring Grout

To overcome the stained grout issue we gave the whole of the grout two coats of white Grout Colourant which is a very effective treatment that forms an epoxy barrier over the gout protecting it from future staining. Normally when you do this we recommend using a pre-treater product that provides a chemical key that allows the colourant to latch on to, in this case however I was happy that the scrubbing we gave the grout with Pro-Clean would have the same effect. The tiles were then wiped down using Tile Doctor Neutral Cleaner to remove any excess colourant from the tiles and give them a finishing shine. The last step was to Shower was finished off by applying new silicone sealant to the areas that were removed. The final result was a shower cubicle that looked recently installed.     Source: Residential and Commercial Tile Cleaning in Glasgow

Cleaning Old Ceramic Tiles

This fifty year old Ceramic tiled floor was installed in the communal parts of a small block of flats in Poole, Dorset. The tiles had not been given a deep clean in a long while and were now ingrained with dirt from many years of wear.

Yellow Ceramic Tiles Before Cleaning in Poole

Cleaning Ceramic Floor Tile and Grout

To clean the tiles a strong dilution of Tile Doctor Pro-Clean was applied a left to soak into the tile for some time before working it into the floor using a rotary machine fitted with a black scrubbing pad. During this process it became clear that there was evidence that the tiles had been previously sealed using a metallised emulsion. This needed to be completely removed by buffing the floor and then steaming it; steaming also removed a myriad of paint spots that had accumulated over the years.

At this stage we took the opportunity to give the grout a good scrub with more Pro-Clean and a stiff hand brush before removing the cleaning solution with a wet vacuum and giving the entire floor a thorough rinse to remove and trace of cleaning product.

Sealing Ceramic Floor Tiles

The tiles were left to dry off overnight and we came back the next day to see if further work was needed. Now normally Ceramic tiles have a glazed surface that a sealer cannot take to however these tiles being were very old and the glaze had been worn off so sealed a small test are to see if it would take. The test was successful so I proceeded to seal the whole floor using Tile Doctor Colour Grow.

Due to the age of the tiles some were more faded than others which I could do nothing about however they looked generally clean and bright after restoration and the new Colour Grow sealer should provide protection for years to come.

Yellow Ceramic Tiles After Cleaning in Poole

 
 
Source: Ceramic tile maintenance in Dorset

Deep Cleaning Dirty Ceramic Tiled Floors

The photograph below was taken in the kitchen of a residence in Bedford where the new owner wanted the Ceramic floor tiles deep cleaned before they moved in; you can see for yourself how dirty they had become.

Cleaning Ceramic Kitchen Floor Tiles in Bedford

Cleaning Ceramic Floor Tiles

To get the clean Ceramic tiles clean I applied a medium strength dilution of Tile Doctor Pro-Clean mixed 50/50 with NanoTech Ultra Clean with a mop; this was left to dwell on the surface of the tile for around twenty minutes. The next step was to then run over the floor using our high pressure Rotovac machine which applies and removes water at high pressure to remove the soil and rinse the floor at the same time. The Rotovac machines are an expensive investment but they do make Tile Cleaning easier, they are also flexible and can be used for carpet cleaning etc.

Source: Deep Ceramic Tile Cleaning in Bedford

Shower Cubicle Refresh

A customer contacted us regarding a Ceramic Tiled Shower Cubicle problem they had with their house in Epsom Downs, Surrey. All the grout and mastic had started to go black and grow mould which is quite a common problem in modern houses and our busy lifestyles and insulated homes with insufficient ventilation.

Epsom Downs Shower Cubicle MouldyGrout Epsom Downs Shower Cubicle MouldyGrout

Cleaning Ceramic Tile and Grout

We started by giving the tiles a good scrub with Tile Doctor Pro-Clean and our non-scratch scrubbing brushes, then we thoroughly scrubbed the grout with more Pro-Clean and a special grout brush designed to get right into the grout and scrub the soil out. We then went over the grout where there was any marks and residue soil with our grout brush and Tile Doctor Grout Clean-up which is a stronger product that can remove mineral deposits and even excess grout from a tile surface.

Grout Sealing

Prevention is better than the cure so the tile and grout was dried with cloths and a heat gun and then left for half an hour. We then damp tested the area to make sure it was dry and was no damp present in the grout before applying Tile Doctor Grout Seal and Go which will seal the grout making it waterproof and stop the mould coming back

Last step was to cut out all the old mastic and seal around the shower and replace it with new silicone sealer finishing the job off nicely

Epsom Downs Shower Cubicle Finished Epsom Downs Shower Cubicle Finished

Source: Shower Cubicle Cleaning West Surrey

Tiled Bathroom Refresh

This Ceramic tiled bathroom with shower was installed at house Wilmslow and was overdue a refresh. You can see from the photographs below that the bathroom was looking tired and the tile and grout was discoloured with mould and acid build-up from washing products.

Ceramic Bathroom Tiles Wilmslow Before Ceramic Bathroom Tiles Wilmslow Before

Cleaning Ceramic Tile and Grout

The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean which is a strong alkaline Tile and Grout cleaning product. The solution was decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry.

Grout Colouring

The grout looked better but I was unable to shift some of the staining so we decided to apply a white Grout Colourant, it’s a time consuming process but I think you will agree it made a big difference. Additionally the grout colourant product we use also forms a barrier over the surface making the grout much easier to clean going forward.

The last step was to remove the silicone sealant from along the top of bath and replace with new.

Ceramic Bathroom Tiles Wilmslow After Ceramic Bathroom Tiles Wilmslow After

 
 
Source: Bathroom Tile Cleaning North-Cheshire

Effective Tile and Grout Cleaning

This Ceramic tiled family bathroom with shower was installed at house in Leighton Buzzard and was in need of rejuvenation. You can see from the photograph below that the tiles were in reasonable condition but the grout had become ingrained with dirt which is not unknown as the top layer of grout is porous and will discolour over time if not protected.

Cleaning Ceramic Tile and Grout

The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean mixed 50/50 with Nanotech Ultraclean which combines a highly powerful Tile and Grout cleaning product with tiny abrasive particles. For vertical tiled surfaces I recommend the mixture is decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry.

Ceramic-Tiled-Shower-Before-and-After-Leighton-Buzzard

Sealing Grout

The grout was dried and the sealed with a couple of coats of Tile Doctor Grout Sealer which forms a protective barrier over the porous grout and keeps it looking good for longer. Most sealers can be used on grout (check the label to confirm) but for best results use a spray bottle as mixing the sealer with air improves its ability to stick to a vertical surface.
 
 
Source: Tile and Grout Cleaning in Bedfordshire

Giving a Ceramic Tiled bathroom a facelift

This Ceramic tiled bath with shower was installed at house in Didsbury, this customer wanted to give the bathroom a facelift and not usually it was the grout rather than the ceramic tile that had discoloured, the silicone also needed to be replaced due to the mould build-up and if you get mould on silicone it’s impossible to remove and can only be replaced. Unfortunately mould build-up in bathrooms is quite common in the UK due to our damp climate and modern insulated homes that restrict air flow. If you’re having this problem yourself consider installing a more powerful extractor fan or simply leaving the door to the bathroom open more often.

Disbury bathroom tile and grout refresh before

Cleaning Tile and Grout

The Ceramic tiles and grout were treated using a strong 2:1 dilution of Tile Doctor Pro-Clean which is a highly recommended Tile and Grout cleaning product; being alkaline it’s safe to use on all sorts of tile and stone surfaces. For vertical tiled surfaces I recommend the mixture is decanted into a bottle with a trigger spray attachment which when sprayed onto the wall allows the cleaner to mix with air making it lighter and allowing it to stick better. The solution was then worked in using a stiff scrubbing brush by hand before being rinsed off with water; this process was repeated a number of times until we had managed to clean all the areas and then left to dry. If you’re doing this work yourself then you should know that Tile Doctor produces a product that comes with a spray attachment called Oxy Pro that is ready to use and can save you some time.

Whilst waiting for the tile and grout to dry the Silicone Sealer was removed using a sharp knife, as I mentioned before once mould gets a grip on silicone it will need to be replaced. It’s also worth mentioning at this point that silicone will last longer if the residue from soaps, shampoos and body washes etc. are rinsed away with clean water after having a shower as it’s the chemical and not the water that damages the silicone in the first place.

Grout Colouring

Cleaning the grout had made a visible difference and improved the overall look of the bathroom but it wasn’t showroom condition so to improve it further it was necessary to apply a white Grout Colourant. The product we use is epoxy based and forms a thin impermeable barrier over the grout so not only does it look good it protects the grout as well; it’s very easily applied using a small brush along the grout lines and you just wipe of the excess so it wasn’t long before the grout was looking like new.

Last step was to re-new the silicone sealant around the top of the bath and the job was finished; my customer was very pleased with the results and made the comment that she thought it looked like new.

Disbury bathroom tile and grout refresh after

 
 
Source: Bathroom refresh company in Manchester

Tackling stained ceramic tiles

This was a rather unusual request we were asked to look at in the Oxfordshire village of Long Hanborough; they had recently laid a new Tarmac drive and unfortunately it had been walked into the Ceramic tiled kitchen floor leaving a lot of dark staining. After failing to clean the tiles with various supermarket floor cleaners she called in Tile Doctor. Tile Doctor cleaning products are industrial strength so when I arrived I gave her a demonstration on a couple of tiles to show I could clean them and she was amazed at how easy I made it look and booked the work with me.

Tarmac Stains on Ceramic Tile in Long Hanborough Before

Removing Tarmac Stains from Ceramic Tiles

To resolve the problem I scrubbed the floor with Tile Doctor Grout Clean Up which is an acid based product designed to remove grout smears and mineral deposits. Ceramic tiles are very durable however being acid based you can’t leave it on the surface too long so the process was to quickly work it into the stain with a stiff bristle brush, rinse with water and then remove using a wet vacuum.

Tarmac Stains on Ceramic Tile in Long Hanborough After

You can see the difference in the final photograph below where the dark staining has disappeared; the difference in tile colour was due to the lighting. The whole job was completed in one day and the customer was relieved that her floor was not ruined and left the comment below on the Tile Doctor feedback system.

He was thorough and excellent. Very grateful.
M. Rawlings, Long Hanborough
 
 
Source: Deep cleaning Ceramic tiles in Oxfordshire